2001 Peugeot 306

Engine covers fitted obscuring some components in the engine bay

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Under-trays fitted obscuring some underside components

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Nearside Rear Brake hose twisted (3.6.B.4c)

Offside Steering rack gaiter split (2.2.D.2d)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

offside rear wheel binding

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Side repeater incorrect colour (1.4.A.2f)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Outer Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Outer Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Headlamp aim too high (1.8)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside rear brake binding (3.7.B.1)

Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

front and rear brake disc surface rusty

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel system component leaking (7.2.3)

Nearside Front Torque/reaction arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Torque/reaction arm has excessive play in a pin/bush (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced (2.4.F.2)

rear parking brake recording little or no effort (3.7.B.6a)

Rear brake disc slightly scored (3.5.1h)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Rear Exhaust mounting missing (7.1.1b)

Nearside Windscreen wiper blade deteriorated (8.2.2)