2001 Piaggio Typhoon 50

All direction indicators light intensity reduced (4.4.3 (a))

Exhaust noisy (8.1.1 (a))

Front Headlamp light intensity reduced (4.1.4 (a))

Horn not working properly (7.7 (a) (i))

Rear Stop lamp light intensity obviously reduced (4.3.3 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

All direction indicators not working (4.4.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Direction indicator obviously incorrectly positioned (4.4.3 (a))

Offside Front Direction indicator obviously incorrectly positioned (4.4.3 (a))

Rear Footrest missing (6.2.12 (a))

Steering operation restricted in free movement from lock to lock Overtight steering bearings (2.1.4 (c))

Throttle control functioning such that safe operation of the motorcycle is adversely affected Insecure (6.2.7 (a) (ii)) DANGEROUS

Indicator tell tale missing (4.9.1 (a) (i))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre valve stem slightly damaged (4.1.2c)

Rear Tyre worn close to the legal limit (4.1.3(i))

Steering movement slightly 'notchy' (2.2.1b)

front brake lever clamp slightly loose on handle bars.

inncorrect nut fitted to rear brake cable adjuster.

Steering movement slightly stiff (2.2.1b)

rear brake cable adjuster has been repaired , seems ok , but advise fitting new cable.

Horn not working (1.7.3a)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Steering movement slightly stiff (2.2.1b)

center stand pivots worn and stand hangs down a bit.

Rear Tyre worn close to the legal limit (4.1.3(i))

Rear reflector on motorcycle obscured (1.4.1)

Front Brake master cylinder insecurely mounted (3.2.B1a)

Headlamp aim too low (1.6)

Rear mudguard losse

Brake component damaged and seriously reduced in strength (3.2.A1)

Steering movement slightly stiff (2.2.1b)

Front and rear tyre walls perishing

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake back plate(s) securing bolt(s) loose (3.2.A1j)

Front and rear tyre walls perishing