2001 Triumph Tiger

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear Position lamp likely to become detached (4.2.1 (c) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Suspension component attachment bracket/mounting likely to fail very creaky in movement (5.3.3 (b) (ii)) DANGEROUS

Suspension arm pin, bush or joint worn but not resulting in excessive movement swingarm bearings (5.3.4 (a) (i))

rear shock damper rod has some wear

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust noisy (7.1.2)

Front suspension has a slightly reduced damping effect (2.3.6c)

Handlebar Ends have sharp edges

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear suspension bearing deteriorated but not excessively (2.4A.2a(i))

Screen has sharp bolts

Nearside Front Brake disc(s) has slight run out (3.2.A1m)

Nearside Front Brake disc(s) slightly pitted (3.2.A1l)

Nearside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Offside Front Brake disc(s) has slight run out (3.2.A1m)

Offside Front Brake disc(s) slightly pitted (3.2.A1l)

Offside Front Brake pad(s) close to minimum limit (3.2.A1f(i))

gaters fitted front forks

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake hose slightly chafed (3.2.B3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a light misting (2.4.A.1c)

nearside stop lamp not working

Front Roller brake test indicates a binding brake (3.3.A1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Brake hose slightly chafed (3.2.B3a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a light misting (2.4.A.1c)

nearside stop lamp not working

Rear Wheel spoke slightly loose. (4.2.1b)

light cracks in sidewall of front tyre

nearside stop lamp bulb not working

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Wheel spoke slightly loose. (4.2.1b)

light cracks in sidewall of front tyre

nearside stop lamp bulb not working

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Brake disc(s) slightly worn (3.2.A1l)

Rear Wheel spoke slightly loose. (4.2.1b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Nearside Front Brake disc(s) slightly worn (3.2.A1l)

Offside Front Brake disc(s) slightly worn (3.2.A1l)