2001 Aprilia Pegaso 650

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake lever is bent and the brake cannot be readily applied (1.1.2 (d))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Steering headbearing excessively stiff or notchy notchy side to side (2.2.2 (f) (i))

Headlamp aim too low (4.1.2 (a))

Front Brake lever is bent but brake can still be readily applied slight bend away from bar (1.1.2 (d))

Front Steering headbearing has excessive wear or free play front headings have back and forth play (2.2.2 (f) (i))

Headlamp aim too low (4.1.2 (a))

Nearside gear change lever mounted incorrectly

Central Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement Bush has small amount of free play! (5.3.4 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Front Upper Fairing bolt missing!

Headlamp aim too high (4.1.2 (a))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Central Rear Lower Suspension pin, bush or joint worn but not resulting in excessive movement Bush has small amount of free play! (5.3.4 (a) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Front Upper Fairing bolt missing!

front tyre has cut on sidewall

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Front Headlamp aim beam image kick up to the offside (1.6)

Front Steering lock stop missing (2.1.3)