2001 Iveco Daily

Nearside marker light not working

Nearside wing mirror damaged

Offside marker light not working

Oil leak, but not excessive (8.4.1 (a) (i))

brake load valve stiff

general corrosion under vehicle

Brake load sensing valve stiff (1.1.17 (c) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch area (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch area (5.3.6 (a) (i))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill outrigger (6.1.1 (c) (i))

Nearside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting panel (6.1.6 (i) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))

Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / outrigger (6.1.1 (c) (i))

Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill x2 outrigger (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure excessively corroded within 30cm of towbar mounting panel (6.1.6 (i) (i))

Rear Exhaust has a major leak of exhaust gases pipe (6.1.2 (a))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension component mounting repair covered in underseal fiberglass repair (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both offside rear outriggers (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill/step (6.1.1 (c) (i))

Nearside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill near fuel tank (6.1.B.2)

Nearside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Offside Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Front position lamp(s) not working marker (1.1.A.3b)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outrigger (6.1.B.2)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger (2.4.A.3)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Direction indicator incorrect colour (1.4.A.2f)

Offside Rear Suspension spring mounting prescribed area is excessively corroded outrigger (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe leaking (3.6.A.1)

Rear Brake pipe excessively corroded (3.6.B.2c)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Headlamp aim too low (1.8)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Headlamp aim too high (1.8)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp not in a clean condition but not affecting beam image (1.2.4a)

brake pipe coming out of nearside rear valve then runs down box section of chassis corroding & pitting.