2001 Triumph Legend

Nearside Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Stop lamp not working (4.3.1 (a) (ii))

Nearside Exhaust silencer slightly loose (8.1.1 (b) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have slight free play (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings have slight free play (2.3.5b)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Drive chain worn to excess (6.2.1e)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front wheel bearings have slight free play (2.3.5b)

Drive chain slightly loose (6.2.1d)

Front wheel bearings have slight free play (2.3.5b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Rear Floor brake test indicates a binding brake (3.3.C2c)

Drive chain slightly loose (6.2.1d)

Front wheel bearings have slight free play (2.3.5b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Drive chain excessively loose (6.2.1d)

Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Front wheel bearings have slight free play (2.3.5b)

Horn not working (1.7.3a)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

lefthand mirror loose

throttle action slightly stiff

Front Front wheel bearings have slight free play (2.3.5b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front wheel bearings have slight free play (2.3.5b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp aim too high (1.6)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a severely grabbing brake (3.3.A1b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake disc(s) slightly scored (3.2.A1l)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))