2001 Proton Satria

ABS system removed from vehicle

Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Slight corrosion to both front and rear floor pans

Nearside Rear Hydraulic brake calliper inadequately mounted Bolt missing (1.1.16 (c) (i))

ABS removed.

ABS system removed.

Play in steering rack inner joint(s) ()

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Rear fog lamp not working (4.5.1 (a) (ii))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced and outer sill (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill. (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

After market front seats and seat belts fitted.

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Brake fluid warning lamp illuminated (1.1.10 (f))

Front brake pads moving when brakes applied.

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis member. (5.3.6 (a) (i))

Offside Front Corrosion in inner wheel arch.

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced Floor pan. (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Chassis member. (5.3.6 (a) (i))

Passenger seat(s) missing at time of test ()

Rear Suspension component mounting prescribed area damaged but not considered excessive Subframe (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Steering rack gaiter split (2.2.D.2d)

Rear fog lamp not working (1.3.2b)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rally guards fitted

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Front Steering rack gaiter deteriorated (2.2.D.2d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Steering rack gaiter deteriorated (2.2.D.2d)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear discs corroded!

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front registration plate faded but not likely to be misread (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is distorted but not considered excessive (2.4.A.3)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear registration plate faded but not likely to be misread (6.3.1d)

Supplementary Restraint System warning lamp does not illuminate (5.4.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside rear wheel bearing slight noise

sill covers fitted

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

offside rear wheel bearing slight noise

sill covers fitted

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front tyres wearing on edges

slight rumble heard from front end during road test

start of corrosion front lower crossmember

Nearside Steering rack gaiter split (2.2.D.2d)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front tyres wearing on edges

slight rumble heard from front end during road test

start of corrosion front lower crossmember

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

o/s/r brake disc corroded

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

o/s/r brake disc corroded

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Steering rack gaiter split (2.2.D.2d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Steering rack gaiter split (2.2.D.2d)

Rear Rear fog lamp not working (1.3.2b)

Rear brake disc excessively pitted (3.5.1h)

Rear brake disc excessively scored (3.5.1h)