2001 Triumph Daytona

Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Steering movement slightly 'notchy' (2.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Inner Front Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

rear insid indicator ont very birte

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Inner Front Brake disc(s) slightly worn (3.2.A1l)

Rear wheel bearings have slight free play (2.4.A.2c)

rear left side not very brite

Brake cylinder leaking hydraulic fluid (3.2.B1e)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Footrest insecure (6.2.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Drive chain slightly tight (6.2.1d)

Nearside Rear Footrest missing (6.2.1a)

Rear Drive chain slightly tight (6.2.1d)