MOT Status
ExpiredMileage
65,143 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc N/S/OUTER (2.5.C.1a)
Steering rack gaiter split O/S (2.2.D.2d)
Subframe mounting prescribed area is excessively corroded N/S/F FLOOR CORNER AREA (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively SPLIT (8.2.2)
OUTER SILL FROM N/S/F BACWARDS CORRODED/HOLED >>> WELDING REQUIRED/ASDVISED
Sub-frame rubber bush deteriorated but not resulting in excessive movement LOWER FRONT SUBFRAME (REAR MOUNTS) (2.4.G.2)
Corrosion around windscreen aperture
Nearside wiper blade rubber torn at end
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension arm has slight play in a ball joint (2.4.G.2)
n/s front wiper torn
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
front floor pans neearside and offside has some damage and corrosion
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
front floor pans neearside and offside has some damage and corrosion
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Brake linkage has restricted free movement (3.5.1k)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Shock absorber has a serious fluid leak (2.7.3)
Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Suspension has inadequate clearance with the chassis (2.4.A.1a)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS
BATTERY CABLE BRACKET CORRODED AWAY
EXHAUST FRONT FLEXY UNION IN POOR CONDITION
Headlamp aim too high (1.8)
REAR MOUNTING POINTS CORRODED > PROTECTION ADVISED
REAR SUBFRAME IS CORRODED IN SEVERAL AREAS > RECOMEND NEW WHEN WELDING REPAIRS ARE REPAIRED
Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Tyre worn close to the legal limit (4.1.E.1)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
nsf wiper not clearing the whole screen
Both front indicator/hazard bulbs starting to show a little 'whiteness'
Very slight oil leak from gear selector shaft seal
Nearside Rear Shock absorber has negligible damping effect (2.7.5)
Offside Rear Shock absorber has negligible damping effect (2.7.5)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Fuel cap rubber starting to perish
Nearside Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Fuel cap rubber starting to perish
Had little servo assistance when servo tested.
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside rear brake well below expected performance
Offside Front wheel bearing has slight play (2.5.A.3c)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
How Reliable is the Rover Mini?
Based on 519,169 MOT tests across 45,631 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y516 BPA is a 2001 Rover Mini in Green with a 1,275cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 57.1%.
Across all 2001 Rover Mini models, the average MOT pass rate is 73.4% with a typical mileage of 35,698 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Mini fails its MOT is subframe mounting prescribed area is excessively corroded, accounting for 32,036 recorded failures. If you're considering buying Y516 BPA, it's worth having these areas checked by a mechanic before committing.
The Rover Mini typically stays on UK roads for around 47 years. At 25 years old, this Rover Mini is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of Y516 BPA?
You can check the full history of Y516 BPA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y516 BPA registered?
Y516 BPA is a 2001 Rover Mini, first registered on 1 March 2001.
Is Y516 BPA safe to buy?
The MOT history for Y516 BPA shows 21 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y516 BPA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y516 BPA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.