MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure (1.9.1)
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front cross member (6.1.B.2)
Brake load sensing valve seized (3.6.E.3)
Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Emissions not tested (7.3.A.1)
Exhaust has a major leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Nearside Front Suspension component mounting prescribed area is excessively corroded subframe (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Stop lamp not working (1.2.1b)
Offside rear brake recording little or no effort (3.7.B.5a)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.C.1d)
Service brake: efficiency below requirements (3.7.B.7)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake cable has wires broken and is significantly weakened (3.5.1b)
Brake pipe excessively corroded both front to rear (3.6.B.2c)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Rear Exhaust system not adequately supported (7.1.1)
rear brake recording little or no effort (3.7.B.5a)
rear parking brake recording little or no effort (3.7.B.6a)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake lever has no reserve travel (3.1.6b)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Headlamp aim too low (1.8)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Rear Brake load sensing valve seized (3.6.E.3)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
crack in windrceen
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear registration plate has a feature which changes the appearance or legibility of the characters (6.3.4c)
Registration plate lamp not working (1.1.C.1d)
crack in windrceen
Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Radius arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
Rear fog lamp not working (1.3.2b)
Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Headlamp aim too high (1.8)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear fog lamp not working (1.3.2b)
Rear Registration plate lamp not working (1.1.C.1d)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.5c)
Brake load sensing valve linkage stiff (3.6.E.3)
Nearside Rear position lamp(s) not in a clean condition but function not impaired (1.1.4a)
How Reliable is the Fiat Scudo?
Based on 592,996 MOT tests across 40,591 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y524 DBA is a 2000 Fiat Scudo in White with a 1,997cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2000 Fiat Scudo models, the average MOT pass rate is 65.6% with a typical mileage of 105,779 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Scudo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 25,288 recorded failures. If you're considering buying Y524 DBA, it's worth having these areas checked by a mechanic before committing.
The Fiat Scudo typically stays on UK roads for around 29 years. At 26 years old, this Fiat Scudo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y524 DBA?
You can check the full history of Y524 DBA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y524 DBA registered?
Y524 DBA is a 2000 Fiat Scudo, first registered on 1 August 2000.
Is Y524 DBA safe to buy?
The MOT history for Y524 DBA shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y524 DBA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y524 DBA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.