2001 Renault Master

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill section (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing/inner sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Brake pipe corroded, covered in grease or other material all pipes under sealed (1.1.11 (c))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive out rigger (5.3.6 (a) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear spring hanger mounting areas (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both chassis rails (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced both rear inner panels corroded and covered with underseal but not prescribed area (6.1.1 (c) (i))

vehicle under body under sealed

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Brake pipe corroded, covered in grease or other material both sides front to rear (1.1.11 (c))

Rear both chassis rails corroded

Emissions unable to be completed coolant leak (8.2.2.2 (e))

Horn not working (7.7 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill corroded (7.1.1 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Position lamp showing white light to the rear damaged (4.2.3 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake pipe corroded, covered in grease or other material all pipes under sealed (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs (5.3.6 (a) (i))

both rear inner body panels repaired with spray foam not prescribed area

both rear spring hanger mounting areas showing signs of corrosion

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement eye bolt (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement eye bolt (5.3.4 (a) (i))

Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal extensively repaired, painted and has areas of corrosion. (5.3.6 (a) (i))

engine oil leaks but not excessive

side marker lamps do not operate

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis beside airbag (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is inadequately repaired forward suspension mounting marked with yellow chalk (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shock absorber mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired forward suspension mounting marked with yellow chalk (5.3.6 (a) (i))

Offside Rear reflector missing (4.8.2 (a) (ii))

Windscreen washer not working (3.5 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement eye bolt (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement eye bolt (5.3.4 (a) (i))

Rear Suspension component mounting repair covered in underseal extensively repaired, painted and has areas of corrosion. (5.3.6 (a) (i))

engine oil leaks but not excessive

side marker lamps do not operate

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))

Offside Rear Outline marker lamp missing (4.2.1 (a) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Leaf spring has slight wear in an anchor pin and/or bush Both rear (5.3.4 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear end of vehicle rusty/corroded in areas outside prescribed sections

rear crossmember and rear floor corroded

Nearside Front Brake hose ferrule excessively corroded x 2 hoses (3.6.B.4e)

Nearside front brake binding (3.7.B.1)

Nearside rear brake binding (3.7.B.1)

Offside Front Brake hose ferrule excessively corroded x 2 hoses (3.6.B.4e)

Offside front brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

rear crossmember and rear floor corroded

Nearside Rear Body has slight corrosion chassis (6.1.B.2)

Nearside Rear Body has slight corrosion inner and outer (6.1.B.2)

Nearside Rear Body has slight corrosion inner body / floor (6.1.B.2)

Offside Rear Body has slight corrosion chassis (6.1.B.2)

Offside Rear Body has slight corrosion inner and outer sill (6.1.B.2)

Nearside Front Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Under-trays fitted obscuring some underside components

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Air suspension levelling valve insecure (2.4.D.4)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Parking brake: efficiency below requirements (3.7.B.7)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Rear Leaf spring has a deteriorated anchor pin rubber bush resulting in excessive movement (2.4.B.2)

Nearside Rear Leaf spring linkage pin excessively loose in its bracket (2.4.B.3a)

Nearside Rear Registration plate lamp not working (1.1.5c)

rear nearside 1/4 bumper missing and rear reflector

Centre Stop lamp not working (1.2.1b)

Nearside Front Front wheel bearing has excessive play (2.5.A.3c)

Nearside Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Leaf spring linkage pin excessively loose in its bracket (2.4.B.3a)

Offside Stop lamp not working (1.2.1b)

Nearside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a) DANGEROUS

Nearside Rear wheel bearing has excessive play (2.6.2) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm (4.1.E.2a) DANGEROUS

Centre Rear Stop lamp excessively damaged so that it is not visible from a reasonable distance (1.2.1d)

Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Nearside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Front Tyre tread depth below requirements of 1.0mm (4.1.E.2b)

Offside Headlamp aim too high (1.8)

Offside Rear Leaf spring anchor bracket loose (2.4.B.6a)

Offside Rear Leaf spring to axle securing bolt insecure (2.4.B.7b)

Outer Front All position lamps not working (1.1.A.3b)