2001 Jaguar Xj

Brake pipe corroded, covered in grease or other material front to rear and nearside front (1.1.11 (c))

Coil spring mounting corroded but not seriously weakened both front lower's (5.3.1 (b) (i))

Drive shaft joint worn, but not excessively both rear inner joint's (6.1.7 (c) (i))

Fuel Pipe/s corroded ()

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive and offside front chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive and offside front chassis behind brake pipe's (5.3.6 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement and offside front upper (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive and offside rear chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive and offside rear chassis by spring top mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive and offside rear inner sill's (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Coil spring corroded and both fronts (5.3.1 (b) (i))

Shock absorbers has slight external damage to the casing both fronts corroded (5.3.2 (b))

Spare tyre defective on limit ()

corrosion various sections outside prescribed areas

Age related corrosion underside of vehicle

Anti-roll bar rubber bush deteriorated but not resulting in excessive movement both rear (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt pin hole still preventing an ingress of dirt (2.4.G.2)

Offside front inner sill area corroded

nearside front inner sill area corroded

nearside rear inner sill area corroded

offside rear floor pan corroded

underside power steering pipes slightly corroded

Exhaust has a minor leak of exhaust gases (7.1.2)

Front coil spring corroded both (2.4.C.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch/sill (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)

general age related corrosion to underbody /sills and fuel lines

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Direction indicator not working (1.4.A.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded inner arch/sill (2.4.A.3)

Offside Headlamp aim too low (1.8)

Offside Rear rear brake binding (3.7.B.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front coil spring corroded both (2.4.C.1b)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch/sill (2.4.A.3)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement all (2.4.G.2)

general age related corrosion to underbody /sills and fuel lines

A/c pump oil leak

Fuel lines starting to corrode

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front inner wheel arch starting to corrode

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Offside Headlamp aim too high (1.8)

Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Upper Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

eml on

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust corroded

fuel lines corroded

rear axle damp

rear brake pads wearing low

Front Brake pad(s) wearing thin (3.5.1g)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

front and rear brake discs corroded

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear registration plate faded but not likely to be misread (6.3.1d)

front and rear brake discs corroded

rear axle damp

some end float in rear drive shafts

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

o/s/f tyre worn on outer edge

rear axle damp

slight noise from n/s/f wheel when rotated

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear brake discs slightly pitted

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)

Offside Rear brake disc slightly pitted (3.5.1h)

Nearside Rear Braking system leaking (3.6.A.1) DANGEROUS

Nearside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)

Offside Front Upper Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Drive shaft uj which forms part of the suspension has slight play in a universal joint (2.4.G.4b)

Offside Rear brake disc slightly pitted (3.5.1h)

Offside Front Seat belt damaged sufficient to obstruct correct operation of the belt (5.2.2a)

Nearside front brake disc corroded

Offside front brake disc corroded

Surface rust on offside rear brake disc