2001 Honda FJS600

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake lever almost touches handlebar.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Brake lever almost touches handlebar.

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake disc(s) slightly worn (3.2.A1l)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake disc(s) slightly worn (3.2.A1l)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Brake disc(s) slightly worn (3.2.A1l)

Front position lamp incorrect colour (1.1.2a)

Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Roller brake test indicates a binding brake (3.3.A1a) DANGEROUS

Nearside Front Wheel has a slightly eccentric bead rim. (4.2.2)

Offside Front Wheel has a slightly distorted bead rim. (4.2.2)