2001 Mazda Demio

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))

Inner Suspension component mounting prescribed area is corroded but not considered excessive Sills (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive Floor (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive All under side (5.3.6 (a) (i))

Front Suspension arm ball joint dust cover severely deteriorated Both (5.3.4 (b) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive Arm mounts (5.3.6 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Inner Suspension component mounting prescribed area damaged but not considered excessive Sills both (5.3.6 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive Both (5.3.6 (a) (i))

Front Suspension arm ball joint dust cover severely deteriorated Both n/s/f and o/s/f (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s/r and o/s/r front swing arm bushes starting to deteriorate (5.3.4 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill marked with chalk (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced marked with chalk (6.1.1 (c) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Suspension arm ball joint dust cover severely deteriorated Both n/s/f and o/s/f (5.3.4 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s/r and o/s/r front swing arm bushes starting to deteriorate (5.3.4 (a) (i))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Vehicle structure has slight corrosion (6.1.A.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test

Front Brake pad(s) wearing thin (3.5.1g)

Items removed from driver's view prior to test

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

exhaust system corroded and deteriorated.

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)