2001 Saab 9-3

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both o/s/r & n/s/r inner wheel arches corroded. (5.3.6 (a) (i))

Nearside Rear n/s/r boot floor corroded

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive o/s/f inner wing rear section. (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule both o/s/r & n/s/r (1.1.12 (f) (i))

Nearside Rear Brake hose has slight corrosion to ferrule n/s/r body to axle hose (1.1.12 (f) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive n/s/r wheel arch area. (7.1.1 (a) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))

Parking brake lever inoperative h/brake cable snapped on brake testing cable frayed. (1.1.6 (d))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced o/s/r inner wheel arch rear section corroded. (6.1.1 (c) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Oil leak, but not excessive transmission / gearbox (8.4.1 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust has a minor leak of exhaust gases rear exhaust box (6.1.2 (a))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Shock absorbers has a slightly worn bush strut insert centre bush slight play (5.3.2 (c))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Exhaust has a minor leak of exhaust gases rear exhaust box (6.1.2 (a))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Rear Tyre slightly damaged/cracking or perishing both o/s and n/s (5.2.3 (d) (ii))

oil leak

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear wiper rubber split

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Tyre has uneven thread pattern

Oil leak

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

nearside rear tyre has slight uneven tread pattern

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Oil leak

Oil leak

Nearside front brake juddering slightly (3.7.A.2b)

Items removed from driver's view prior to test

Nail in nearside front tyre

Nail in nearside rear tyre

Oil leak

Vehicle's internal headlight adjuster altered to recheck lights

small cut in offside front tyre outer sidewall (not showing cords)

Child seat fitted not allowing full inspection of adult belt

Child seat fitted not allowing full inspection of adult belt

Child seat fitted not allowing full inspection of adult belt

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Headlamp aim too low (1.8)

Brake master cylinder/servo mounting prescribed area is fractured (3.6.C.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Steering component mounting prescribed area is fractured (2.2.C.1h)