MOT Status
ExpiredMileage
107,873 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
Brake load sensing valve defective and function impaired (3.6.E.3)
Horn control insecure (1.6.1)
Nearside Front Inner Subframe mounting prescribed area is excessively corroded chassis rail (2.4.A.3)
Nearside Obligatory mirror seriously obscured affecting the rear view (8.1.2a)
Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill (2.4.A.3)
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)
offside body mount corroded but not seriously affecting its strength
offside front subframe mount corroded but not seriously affecting its strength
rear cross member and tow hitch corroded
vehicle has alot of welding
whole underneath of vehicle badly corroded
Nearside Front Anti-roll bar has excessive play in a ball joint drop link bolt also loose (2.4.G.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole in inner wheel arch (6.1.B.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Steering arm has relative movement at its fixings (2.2.B.1h)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
offside body mount corroded but not seriously affecting its strength
offside front subframe mount corroded but not seriously affecting its strength
offside front wiper blade split
rear cross member and tow hitch corroded
rear washer not working
vehicle has alot of welding
whole underneath of vehicle badly corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Coil spring mounting corroded but not seriously weakened (2.4.C.3c)
Offside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside front brake fluctuating, but not excessively (3.7.B.3)
rear brake pipes poorly secured
rear crossmember and tow hitch corroded
vehicle has had alot of welding
vehicle undersilled
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a)
Brake pedal reservoir fluid level decreases after several brake applications (3.3.C.1)
Brake pedal spongy (3.3.B.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Coil spring mounting corroded and seriously weakened (2.4.C.3c)
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside rear brake recording little or no effort (3.7.B.5a)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside front brake recording little or no effort (3.7.B.5a)
Service brake: efficiency below requirements (3.7.B.7)
front brake application uneven (3.7.B.2)
rear brake application uneven (3.7.B.2)
Nearside Rear Brake pipe leaking (3.6.A.1) DANGEROUS
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Coil spring mounting corroded but not seriously weakened (2.4.C.3c)
Offside Rear Trailing arm attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
rear crossmember and tow hitch corroded
vehicle has had alot of welding
vehicle undersilled
vehicle undersilled
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside rear disc corroded and pitted
vehicle generally corroded
vehicle has had alot of welding done
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Offside rear brake grabbing severely (3.7.A.5b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
offside rear disc corroded and pitted
vehicle generally corroded
vehicle has had alot of welding done
vehicle undersilled
brake pipe crodded/slightly .various places
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Headlamp not working on main beam (1.7.5a)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
brake pipe crodded/slightly .various places
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
underbody has slight corrosion all over
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Statutory seat belt missing (5.1.1) DANGEROUS
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
underbody has slight corrosion all over
Nearside Front Obligatory mirror missing (8.1.1)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y568 HLS is a 2001 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 61.1%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y568 HLS, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y568 HLS?
You can check the full history of Y568 HLS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y568 HLS registered?
Y568 HLS is a 2001 Mercedes-benz Vito, first registered on 23 August 2001.
Is Y568 HLS safe to buy?
The MOT history for Y568 HLS shows 18 tests with a 61.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y568 HLS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y568 HLS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.