2001 Honda CBR600FS

Front Stop lamp not working control 1 (4.3.1 (a) (ii))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

seat base bolt missing but seat is secure

Front Tyre has a lump or bulge caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

All direction indicators adversely affected by the operation of another lamp all 4 flash together (4.4.3 (b))

Nearside Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Exhaust noisy (8.1.1 (a))

Nearside Drive chain slightly tight (6.1.7 (k) (i))

Nearside Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Exhaust noisy (8.1.1 (a))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake master cylinder slightly loose pivot clip missing advise attention (1.1.10 (c))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Front Valve stem slightly damaged (5.2.3 (j))

Rear Brake master cylinder slightly loose pivot clip missing advise attention (1.1.10 (c))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Offside Front Tyre worn close to the legal limit (4.1.3(ii))

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)

Nearside Rear Direction indicator not working (1.5.1c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Nearside Front Brake component is slightly corroded (3.1.5)

Rear suspension bearing has slight free play (2.4.A2a(i))

Drive chain slightly loose (6.2.1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bush has slight free play (2.4.A2a(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i)) DANGEROUS

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly 'notchy' (2.2.1b)

Nearside Rear Direction indicator not working (1.5.1c)

Rear reflector on motorcycle missing (1.4.1)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))