2001 Honda Cbr 600 F

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Lower Exhaust is leaking and excessively noisey (7.1.1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Throttle operating incorrectly sticking (6.2.1f)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Offside Rear Direction indicator slightly discoloured (1.5.1b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

Offside Front Direction indicator slightly discoloured (1.5.1b)

Offside Rear Direction indicator slightly discoloured (1.5.1b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain slightly loose (6.2.1d)

Offside Front Direction indicator slightly discoloured (1.5.1b)

Offside Rear Direction indicator slightly discoloured (1.5.1b)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pedal is bent but brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Brake pedal is bent but brake can still be readily applied (3.1.3c)

L/h handlebar end weight missing.

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Brake pedal is bent but brake can still be readily applied (3.1.3c)

Drive chain slightly loose (6.2.1d)

L/h handlebar end weight missing.

Exhaust slightly deteriorated (7.1.1a)

advise front tyre worn unevenly

advise l/h bar end missing

advise slight damage to wheel rim

Front Floor brake test indicates a binding brake (3.3.C2c)

Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.1)

Direction indicator affected by the operation of another lamp (1.5.1c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel damaged but not significantly reducing the original strength (4.2.1a)

Rear Brake fluid reservoir fluid level low (3.2.B1d)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play (2.4.A2a(i))

WARNING engine turns off when headlights turned on.NOT GOOD.

check sub frame bolt tensions.

front forks twisted in yokes.

front tyre unevenly worn close to limit.

machine damaged all down n/s from front to back.

main stand lever bent.

n/s handle bar balence weight missing.

n/s handlebar appears slightly bent.