2001 Honda VTR1000 F

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

chain guard not fitted

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

chain guard not fitted

Rear Suspension component pin or bush excessively worn Shock linkage (5.3.4 (a) (i))

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Chain guard missing

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Exhaust noisy (8.1.1 (a))

Offside Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear Wheel alignment slightly misaligned (2.4 (a))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust noisy (8.1.1 (a))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Direction indicator missing (4.4.1 (a) (ii))

Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Rear All direction indicators adversely affected by the operation of another lamp rear indicators incorporated into rear light>too close together (4.4.3 (b))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Suspension component pin or bush excessively worn *****DANGEROUS*** Excessive play in lower linkage (5.3.4 (a) (i))

Rear Vehicle identification number not legible size incorrect (0.2 (b))

Front Headlamp light intensity reduced covered but still shows white light (4.1.4 (a))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Exhaust noisy (7.1.2)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Offside Front Brake hose stretched by steering movement (3.2.B3b)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

front mudguard is rubbing on tyre

o/s/f brake flexi-hose is unclipped

Steering movement slightly 'notchy' (2.2.1b)