2001 Honda C90

Front suspension has a modification which reduces the strength of a load bearing member or its supporting structure. (2.3.8)

Rear suspension fouling which affects the movement of the rear suspension (2.4.A.3a)

Steering headbearing has excessive free play (2.2.2)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Handlebar mounting clamp bolt loose (2.1.1a)

Headlamp aim too low (1.6)

Headlamp dipped beam affected by the operation of the horn (1.2.2c)

Nearside Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Offside Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Riders seat insecure (6.2.1a)

Steering headbearing has excessive free play (2.2.2)

Stop lamp affected by the operation of another lamp (1.3.2)

Front Wheel alignment incorrect which adversely affects the handling (2.5.1) DANGEROUS

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1) DANGEROUS

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Wheel spoke slightly bent. (4.2.1b)

Front Wheel spoke slightly loose. (4.2.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

chain gaurd missing

front mudgaurd insecure

offside mirror broken

topbox loose

front tyre soft

rear tyre soft

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front suspension assembly has slight free play in the pivot bearings. (2.3.2)

Offside Front suspension assembly has slight free play in the pivot bearings. (2.3.2)

Horn missing (1.7.1)

Nearside Direction indicator not working (1.5.1c)

Centre Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2)

Centre Headlamp missing (1.2.3a)

Front Wheel spoke excessively loose (4.2.1b)

Front suspension assembly component excessively bent (2.3.1)

Front wheel bearings have excessive free play (2.3.5b)

Handlebar mounting excessively deteriorated (flexible type) (2.1.1d)

Nearside Front Direction indicator missing (1.5.1a)

Nearside Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Offside Direction indicator not working (1.5.1c)

Registration plate insecure (6.3.1b)

Stop lamp missing (1.3.3a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Front suspension assembly has excessive free play in the pivot bearings. (2.3.2)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain excessively loose (6.2.1d)