2001 Suzuki GSF600

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Engine wont run

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Engine wont run

Front Brake binding but not excessively (1.2.1 (f))

Rear Brake binding but not excessively (1.2.1 (f))

Front Brake binding but not excessively (1.2.1 (f))

Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Brake binding but not excessively (1.2.1 (f))

Offside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing has excessive play carrier (5.1.3 (a) (i))

Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Steering operation restricted in free movement from lock to lock (2.1.4 (c))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Suspension pin, bush or joint worn but not resulting in excessive movement centre (5.3.4 (a) (i))

oil leak oil cooler

tyre valve perished

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake lining(s) close to minimum limit (1.1.13 (a))

Offside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

speedo unit only secured with 1 bolt.

Drive chain worn to excess ad loose (6.2.1e)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Rear Direction indicators not working (1.5.1c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear suspension bearing has excessive free play middle linkage bearing (2.4.A2a(i))

Offside Front Brake pad(s) close to minimum limit (3.2A1f(ii))

speedo unit only secured with 1 bolt.

Centre Lower Rear suspension bearing has excessive free play (2.4.A2a(i))

Drive chain worn to excess (6.2.1e)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain sprocket carrier worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Exhaust noisy (7.1.2)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Exhaust noisy (7.1.2)

Rear Brake disc(s) slightly pitted (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Drive chain excessively tight (6.2.1d)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

front and rear tyres have small cracks in

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

front tyre tread starting to perish

Offside Front shock absorber has light misting of stanchion (2.3.3)