2001 Mercedes-benz Clk

Front Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Front Suspension arm ball joint has slight play both (5.3.4 (a) (i))

Nearside Parking (secondary brake) grabbing slightly (1.3.1 (c))

Rear Exhaust has a minor leak of exhaust gases pipe (6.1.2 (a))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive both (7.1.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))

Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Front Suspension arm ball joint has slight play both (5.3.4 (a) (i))

Nearside Parking (secondary brake) grabbing slightly (1.3.1 (c))

Rear Exhaust has a minor leak of exhaust gases pipe (6.1.2 (a))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive both (7.1.1 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both (5.3.6 (a) (i))

Driver's seat insecure (6.2.5 (a) (ii))

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Offside Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

rear parking (secondary) brake grabbing slightly (3.7.B.6b)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Nearside Steering rack insecure (2.2.B.1a)

Offside Front suspension has slight movement at a suspension ball joint (2.5.A.1c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

rear parking (secondary) brake grabbing slightly (3.7.B.6b)

Nearside Front Ball joint has slight play (2.2.B.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

offside front tyre wearing on inner edge

Front Brake pad(s) wearing thin (3.5.1g)

Offside Inner Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Registration plate lamp not working (1.1.5c)

offside front tyre wearing on inner edge

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)