2001 Royal Enfield Bullet 350

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Wheel alignment slightly misaligned (2.4 (a))

Drive chain slightly tight has tight spot (6.1.7 (k) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front advise perishing

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front advise perishing

Drive chain slightly tight has tight spot (6.1.7 (k) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Stop lamp remains on when the brake is released (1.3.1e)

ADVISE CHANGE HANDLE BARS

Brake lever has inadequate reserve travel (3.1.3b)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Fuel system component insecure (7.2.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush deteriorated but not excessively (2.4.A2a(i))

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Steering movement slightly 'notchy' (2.2.1b)

ADVISE CHANGE HANDLE BARS

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear suspension bush deteriorated but not excessively (2.4.A2a(i))

Steering movement slightly 'notchy' (2.2.1b)