2001 Piaggio Vespa

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Riders seat slightly loose (6.2.5 (a) (ii))

Front Headlamp aim too high (4.1.2 (a))

Front Tyre has ply or cord exposed (5.2.3 (d) (ii)) DANGEROUS

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Riders seat slightly loose (6.2.5 (a) (ii))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake lever has insufficient reserve travel (1.1.2 (a))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Fuel cap sealing washer missing (7.2.2c)

Headlamp aim too low (1.6)

Offside Direction indicators flashing more than 120 times per minute (1.5.1c)

Offside Front Direction indicator incorrect colour (1.5.1b)

Throttle operating incorrectly (6.2.1f) DANGEROUS

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Headlamp aim too low (1.6)

Offside Front Brake master cylinder slightly corroded (3.2.B1b)

Front Brake master cylinder fluid level low (3.2.B1d)

Front wheel bearings have slight free play (2.3.5b)

Rear Exhaust mounting deteriorated. (7.1.1.c)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Front Brake master cylinder fluid level low (3.2.B1d)

Front wheel bearings have slight free play (2.3.5b)

Rear Exhaust mounting deteriorated. (7.1.1.c)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

battery has no charge requires new