2001 Rover 45

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Nail in tyre

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

exhaust deteriorated

surface corrosion to front and rear suspension components

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Nail in tyre

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

exhaust deteriorated

surface corrosion to front and rear suspension components

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Nearside Rear Nail in tyre

Offside Brake pipe corroded, covered in grease or other material front to rear at rear (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Nearside Rear Nail in tyre

Offside Brake pipe corroded, covered in grease or other material front to rear at rear (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor area (5.3.6 (a) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes (5.3.4 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Brake pipe slightly damaged (1.1.11 (c))

surface rust beneath vehicle.

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

both front floor pans getting corroded and border line

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))

Central Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Central Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm, front bushes (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing all four perished on inner sidewalls (5.2.3 (d) (ii))

both front floor to sill areas corroded

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm, front bushes (5.3.4 (a) (i))

Tyre slightly damaged/cracking or perishing all four perished on inner sidewalls (5.2.3 (d) (ii))

both front floor to sill areas corroded

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

surface corrosion front,rear suspension,shockers,springs,exhaust,o/s n/s front outriggers,floors,inner rear sill,o/s front to rear metal brake pipe

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

surface corrosion front,rear suspension,shockers,springs,exhaust,o/s n/s front outriggers,floors,inner rear sill,o/s front to rear metal brake pipe

surface corrosion front,rear suspension,front floors and outriggers

sill covers fitted

surface corrosion o/s n/s front floors,front outriggers,exhaust

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

sill covers fitted

surface corrosion o/s n/s front floors,front outriggers,exhaust

surface corrosion front subframe,exhaust

surface corrosion o/s n/s front floors,front outriggers,front,rear suspension

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

surface corrosion front subframe,exhaust

surface corrosion o/s n/s front floors,front outriggers,front,rear suspension

exhaust corroded

surface corrosion o/s n/s front floors,front outriggers,front,rear suspension

both rear tyres perished

sill covers fitted

surface corrosion o/s n/s front,rear suspension,front floors exhaust,

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

surface corrosion front outriggers,exshaust

surface corrosion front floors,front surspension

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

surface corrosion to both front floor pans

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)