MOT Status
ExpiredMileage
100,385 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced n/s inner sill corroded but outside 30 cm of anything structual (6.1.1 (c) (i))
Nearside Front Lower Vehicle structure is corroded but structural rigidity is not significantly reduced door sill panel corroded not within 30 cm of anything structual (6.1.1 (c) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and out rigger (5.3.6 (a) (i))
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front outer sill outside prescribed area
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Outer sill (5.3.6 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))
Nearside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))
Offside Rear Leaf spring shackle pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Inner Tyre tread depth below requirements of 1.6mm 195 70 15c (5.2.3 (e)) DANGEROUS
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Central Exhaust has a major leak of exhaust gases (7.1.2)
Horn not working (1.6.2a)
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)
Offside Rear rear brake binding (3.7.B.1)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Inner corrosion out of prescribed areas
Nearside Front Outer corrosion out side prescribed areas
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive under arch (2.4.A.3)
Offside Front Outer corrosion out of prescribed areas
Offside Front lower mirror glass missing
exhaust boxes outer skins deteriorated
rad support panel corroded
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner / outer (2.4.A.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Inner corrosion out of prescribed areas
Nearside Front Outer corrosion out side prescribed areas
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive under arch (2.4.A.3)
Offside Front Outer corrosion out of prescribed areas
Offside Front lower mirror glass missing
exhaust boxes outer skins deteriorated
rad support panel corroded
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nail in nearside rear tyre
rad surport pannal corrodding
Nearside front brake excessively fluctuating (3.7.B.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside front brake excessively fluctuating (3.7.B.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nail in nearside rear tyre
rad surport pannal corrodding
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front Brake pipe excessively corroded (3.6.B.2c)
Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Lower Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Upper Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Upper Brake pipe excessively corroded (3.6.B.2c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pipe excessively corroded (3.6.B.2c)
Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Oil leak
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Lower Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Upper Brake pipe slightly corroded (3.6.B.2c)
Offside Front Upper Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Oil leak
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Brake pipe slightly corroded (3.6.B.2c)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Brake pipe slightly corroded (3.6.B.2c)
Front Windscreen wiper blade deteriorated (8.2.2)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y689 TOJ is a 2001 Peugeot Boxer in White with a 1,905cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2001 Peugeot Boxer models, the average MOT pass rate is 69.8% with a typical mileage of 51,398 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying Y689 TOJ, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 25 years old, this Peugeot Boxer is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y689 TOJ?
You can check the full history of Y689 TOJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y689 TOJ registered?
Y689 TOJ is a 2001 Peugeot Boxer, first registered on 9 August 2001.
Is Y689 TOJ safe to buy?
The MOT history for Y689 TOJ shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y689 TOJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y689 TOJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.