MOT Status
ValidMileage
197,244 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Hazard warning switch faulty (4.4.2 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Play in steering rack inner joint(s)
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Shock absorbers has a reduced damping effect (5.3.2 (d))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sides inner sill (6.1.1 (c) (i))
Front Anti-roll bar linkage ball joint has slight play both sides (5.3.4 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Play in steering rack inner joint(s)
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Shock absorbers has a reduced damping effect (5.3.2 (d))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sides inner sill (6.1.1 (c) (i))
Hazard warning switch faulty (4.4.2 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Play in steering rack inner joint(s)
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Shock absorbers has a reduced damping effect (5.3.2 (d))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Play in steering rack inner joint(s)
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Shock absorbers has a reduced damping effect (5.3.2 (d))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Integral body structure is corroded but structural rigidity is not significantly reduced both front sills (6.1.1 (c) (i))
Front Side repeater slightly discoloured both sides (4.4.3 (a))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Steering linkage ball joint has slight play inner tie rod (2.1.3 (b) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Integral body structure is corroded but structural rigidity is not significantly reduced both front sills (6.1.1 (c) (i))
Front Side repeater slightly discoloured both sides (4.4.3 (a))
Hazard warning switch faulty (4.4.2 (a) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Steering linkage ball joint has slight play inner tie rod (2.1.3 (b) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced both sills (6.1.1 (c) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: efficiency below requirements (3.7.B.7)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
offside inner cv gaitor split
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
offside inner cv gaitor split
offside inner cv gaiter split
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y697 ORT is a 2001 Mercedes-benz Vito in Silver with a 2,151cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 72.4%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y697 ORT, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y697 ORT?
You can check the full history of Y697 ORT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y697 ORT registered?
Y697 ORT is a 2001 Mercedes-benz Vito, first registered on 23 July 2001.
Is Y697 ORT safe to buy?
The MOT history for Y697 ORT shows 29 tests with a 72.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y697 ORT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y697 ORT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.