MOT Status
ExpiredMileage
188,957 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar pin or bush excessively worn Both front anti roll bar 'D' bushes have excessive play (5.3.4 (a) (i))
Horn not working (7.7 (a) (ii))
Nearside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Nearside inner sill holed in various places (6.1.1 (c) (i))
Offside Front Body panel corroded and likely to cause injury (6.2.1 (a) (i))
Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Offside sill inner and outer holed in various places (6.1.1 (c) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Offside front chassis behind light unit holed (6.2.2 (d) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Unable to open boot
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Nearside front jacking point excessively corroded (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Offside outer sill holed (6.1.1 (c) (i))
Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Side repeater incorrect colour (4.4.3 (a))
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Offside Inner Sill Holed (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Nearside front jacking point excessively corroded (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced Offside outer sill holed (6.1.1 (c) (i))
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
vehicle badly corroded throughout
Horn not working (1.6.2a)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
vehicle badly corroded throughout
Brake load sensing valve defective and function impaired (3.6.E.3)
Headlamp aim too high (1.8)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill and inner sill and out riggers (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel arch (6.1.B.2)
Offside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings inner sills and out riggers and front jacking point (6.1.B.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind wheel arch (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings behind bumper (6.1.B.2)
Rear Brake pipe excessively corroded rear pipes from wheels to the front of vehicle (3.6.B.2c)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Nearside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Track rod end ball joint has slight play (2.2.B.1f)
Rear Brake pad(s) repaired, but not inappropriately (3.5.1n)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rear under side corroded
Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Subframe mounting prescribed area is excessively corroded front (2.4.A.3)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Front suspension has excessive play in an outer ball joint (2.5.B.2a)
Offside Front Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded rear inner wheel arch (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate deteriorated (6.3.1d)
Nearside Headlamp damaged but light output not reduced (1.7.5a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rear under side corroded
Rear Vehicle structure has slight corrosion (6.1.B.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nearside headlight damaged
nearside rear outer sill corroded
offside rear outer sill corroded
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Vehicle structure has slight corrosion (6.1.B.2)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
nearside headlight damaged
nearside rear outer sill corroded
offside rear outer sill corroded
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s headlight
o/s/r quarter corroded and holed
Brake load sensing valve seized (3.6.E.3)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear fog lamp not working (1.3.2b)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s headlight
o/s/r quarter corroded and holed
rear braking effort and handbrake effort
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
mirror ornaments
n/s/f inner cv boot torn
n/s/r inner disc face pitted
rear brake pipes
rear load sensor
Centre Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y707 DCE is a 2001 Mercedes-benz Vito in Silver with a 2,151cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y707 DCE, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y707 DCE?
You can check the full history of Y707 DCE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y707 DCE registered?
Y707 DCE is a 2001 Mercedes-benz Vito, first registered on 16 May 2001.
Is Y707 DCE safe to buy?
The MOT history for Y707 DCE shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y707 DCE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y707 DCE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.