MOT Status
ExpiredMileage
161,248 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outersill (5.3.6 (a) (i))
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch (7.1.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Electrical wiring for braking components extremely deteriorated (4.11 (b) (iii)) DANGEROUS
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive wheel arch (7.1.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Brake warning device malfunctioning or defective wire broken (1.1.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear backing plate corroded
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Registration plate lamp not working (1.1.C.1d)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Rear Direction indicator slightly discoloured (1.4.A.2f)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Outer Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Registration plate lamp not working (1.1.5c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the BMW 316?
Based on 1,210,990 MOT tests across 108,989 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y709 HHB is a 2001 BMW 316 in Blue with a 1,895cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2001 BMW 316 models, the average MOT pass rate is 69.4% with a typical mileage of 85,754 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 316 fails its MOT is brake pipe excessively corroded, accounting for 71,150 recorded failures. If you're considering buying Y709 HHB, it's worth having these areas checked by a mechanic before committing.
The BMW 316 typically stays on UK roads for around 38 years. At 25 years old, this BMW 316 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of Y709 HHB?
You can check the full history of Y709 HHB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y709 HHB registered?
Y709 HHB is a 2001 BMW 316, first registered on 31 May 2001.
Is Y709 HHB safe to buy?
The MOT history for Y709 HHB shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y709 HHB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y709 HHB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.