2001 Kia Shuma

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake lever has no reserve travel (3.1.6b)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear coil spring corroded (2.4.C.1b)

front number plate slightly faded

Nearside Brake pipe inadequately clipped (3.6.B.1)

Nearside Headlamp aim too high and too far to the left. (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Exhaust system not adequately supported (7.1.1)

rear brake application uneven (3.7.B.2)

Battery insecure

Engine managment light on

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside outer track rod end joint cover split/missing

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both rear inner wings corroded and holed but not within 30cm of any body mountings

front discs worn and pitted

front wipers not clearing screen 100%

fuel filter slightly corroded

o/s wiper blade torn at ends

petrol tank securing bands slightly corroded

rear sub frame corroded but not holed

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Brake pipe excessively corroded (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)