2001 Mercedes-benz Vito

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement d bush (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Rear Vehicle structure inadequately repaired seriously affecting its strength within 30cm of towbar mounting crossmember (6.6.6)

Rear fog lamp not working (1.3.2b)

Nearside Front Wheel stud(s) missing (4.2.A.1e) DANGEROUS

Nearside Front Inner sill corroded

Nearside Front Vehicle structure has slight corrosion chassis (6.1.B.2)

Nearside Outer sill corroded

Offside Outer sill corroded

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

under trays and engine covers fitted

Front front brake excessively fluctuating (3.7.B.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Inner Subframe mounting prescribed area is excessively corroded arch (2.4.A.3)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

rear valance corroded

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Wheel stud(s) missing (4.2.A.1e)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Wheel stud(s) missing (4.2.A.1e)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.B.7)

Power steering pipe(s) or hose(s) leaking (2.3.3b)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Oil leak

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

rear valance corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside and nearside sill corroded

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Wheel stud(s) missing (4.2.A.1e)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a) DANGEROUS

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

offside and nearside sill corroded

Nearside Inner Front Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Offside Outer Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Fuel cap/sealing device missing (7.2.4a) DANGEROUS

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

advise play at offside inner track rod

Nearside Front Brake hose leaking (3.6.A.1)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Body has slight corrosion (6.1.B.2)

Oil leak

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Brake hose excessively damaged (3.6.B.4d)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear fog lamp not working (1.3.2b)

Offside Side repeater incorrect colour (1.4.A.2f)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)