2001 Yamaha SR125

Exhaust noisy (8.1.1 (a))

Front Direction indicator obviously incorrectly positioned Both front lamps (4.4.3 (a))

Rear Brake component insecure Rear brake torque reaction bar mounting fixtures (1.1.21 (c))

Rear reflector missing (4.8.2 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

ADVISE PAINT BE CLEARED FROM PETROL CAP

ADVISE REAR SUSPENSION VERY STIFF

Chain guard missing ()

Drive chain slightly tight (6.2.1d)

Steering movement slightly stiff (2.2.1b)

advise tighten front brake adjuster at lever

Brake reaction bracket insecure FRONT (3.2.A1j)

Direction indicators not working (1.5.1c)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Roller brake test indicates a binding brake (3.3.A1a)

Fuel system component insecure CLIPS REQ'D (7.2.1b)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear reflector on motorcycle does not reflect squarely to the rear (1.4.1)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Front suspension assembly component loose (2.3.1) DANGEROUS

Motorcycle structure adversely modified FRONT DISC FIXING LIKELY TO IMPEADE ROTATION (6.1.1b) DANGEROUS

Rear suspension bush has excessive free play SWING ARM (2.4.A2a(i)) DANGEROUS

Steering headbearing has excessive free play (2.2.2) DANGEROUS

ADVISE PAINT BE CLEARED FROM PETROL CAP

ADVISE REAR SUSPENSION VERY STIFF

Chain guard missing ()

Rear Drive chain sprocket slightly worn (6.2.1e)

Brake locking device missing (3.2.A1e)

Drive chain excessively loose (6.2.1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Rear Drive chain sprocket slightly worn (6.2.1e)

Footrest missing (6.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Registration plate insecure (6.3.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Roller brake test indicates a binding brake (3.3.A1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))