2001 Honda CG125

Rear Brake component inadequately mounted rear brake anchor bolt loose (1.1.21 (c))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake lining(s) close to minimum limit (1.1.13 (a))

Offside Front SWITCH GEAR IS LOOSE

Rear Road spring corroded BOTH N/S AND O/S (5.3.1 (b) (i))

Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front SWITCH GEAR IS LOOSE

Rear Road spring corroded BOTH N/S AND O/S (5.3.1 (b) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Rear Brake lining(s) close to minimum limit (1.1.13 (a))

Front Brake cable has restricted free movement (1.1.15 (e))

Front Stop lamp not working (4.3.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

All direction indicators light intensity significantly reduced when brake light applied (4.4.3 (a))

Brake back plate insecure locking device missing (1.1.14 (d))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Brake lever is short but brake can still be readily applied (1.1.2 (d))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Rear Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Wheel alignment incorrect which adversely affects the handling (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Drive chain sprocket slightly worn (6.2.1e)