2001 Mazda MX-5

General corrosion under vehicle

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

General corrosion under vehicle

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Nearside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened Both (5.3.3 (b) (i))

Nearside Rear sill slightly corroded

Offside Front chassis slightly corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive Chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated upper arm (5.3.4 (b) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Brake pipe excessively corroded Front to rear pipe (1.1.11 (c))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Upper Suspension arm ball joint dust cover severely deteriorated upper arm (5.3.4 (b) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

all suspenshon components rusted

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Registration plate lamp not working (1.1.C.1d)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.C.1d)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

nearside front tyre on legal limit (inner edge)

Headlamp aim too low (1.8)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

nearside front tyre on legal limit (inner edge)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front front brake grabbing slightly (3.7.A.2b)

Nearside Rear brake disc slightly pitted (3.5.1h)

rear no. plate minor deterioration

Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)