MOT Status
ExpiredMileage
124,126 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material n/s/f and o/s/f (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive back of rear quarter panel (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both sides sill ends inner arch (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear floor,s and backing sill,s (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material n/s/f and o/s/f (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive back of rear quarter panel (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both sides sill ends inner arch (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive rear floor,s and backing sill,s (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
nearside rear lower inner 1/4 corroded
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
nearside rear lower inner 1/4 corroded
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both rear wheel arches corroded
exhaust corroded
nearside rear lower inner panel corroded& holed
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too far to the left (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Centre Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both rear wheel arches corroded
exhaust corroded
nearside rear lower inner panel corroded& holed
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front wipers split but clearing screen
n/s and os rear wheel arches corroded
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front wipers split but clearing screen
n/s and os rear wheel arches corroded
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front front brake juddering slightly (3.7.A.2b)
of side front inner brake disc excessively corroded
Nearside Front front brake juddering slightly (3.7.A.2b)
Offside Front front brake juddering slightly (3.7.A.2b)
off side front inner disc corroded
Offside Inner Front brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y741 WDM is a 2001 Mazda 323 in Green with a 1,598cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 77.8%.
Across all 2001 Mazda 323 models, the average MOT pass rate is 71.0% with a typical mileage of 68,232 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying Y741 WDM, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 25 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of Y741 WDM?
You can check the full history of Y741 WDM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y741 WDM registered?
Y741 WDM is a 2001 Mazda 323, first registered on 29 June 2001.
Is Y741 WDM safe to buy?
The MOT history for Y741 WDM shows 18 tests with a 77.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y741 WDM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y741 WDM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.