2013 Toyota Previa

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Coil spring corroded (5.3.1 (b) (i))

Brake pipe corroded, covered in grease or other material all 4 (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

general corrosion underbody

Brake pipe corroded, covered in grease or other material both sides rear (1.1.11 (c))

Coil spring corroded both sides rear (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

underbody corroded

Brake pipe corroded, covered in grease or other material both sides rear (1.1.11 (c))

Coil spring corroded both sides rear (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Windscreen washer provides insufficient washer liquid (3.5 (a))

underbody corroded

Brake pipe corroded, covered in grease or other material Both Rear (1.1.11 (c))

Coil spring corroded Both Rear (5.3.1 (b) (i))

Suspension arm pin or bush worn but not resulting in excessive movement Both Rear Arms (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension arm pin or bush worn but not resulting in excessive movement both front arms , rear bushes (5.3.4 (a) (i))

heat shield insecure

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Engine mounting bracket damaged or deteriorated resulting in excessive movement both top and bottom mountings (6.1.8 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Road wheel fixing missing one nut (5.2.1 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension arm pin or bush worn but not resulting in excessive movement both front arms , rear bushes (5.3.4 (a) (i))

heat shield insecure

Brake disc worn, but not excessively both rear (1.1.14 (a) (i))

Emissions not tested engine missfire (7.3.A.1)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner edge (4.1.D.1a)

Offside Rear Rear fog lamp missing (1.3.2a)

Rear fog lamp switch missing (1.3.1a)

Brake pad(s) wearing thin both front (3.5.1g)

Brake pad(s) wearing thin both rear (3.5.1g)

brake disc worn, pitted or scored, but not seriously weakened both front (3.5.1i)

brake disc worn, pitted or scored, but not seriously weakened both rear (3.5.1i)