2001 Suzuki VL125

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front tyre casing cracking

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Roller brake test indicates a binding brake (3.3.A1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Rear Direction indicator insecure (1.5.3b)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear wheel bearings have excessive free play (2.4.A.2c)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain slightly loose (6.2.1d)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Brake pedal has inadequate reserve travel (3.1.3b)

Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Front Brake disc(s) excessively worn (3.2.A1l)

Front wheel bearings have excessive free play (2.3.5b)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Drive chain slightly loose (6.2.1d)

Front Brake lever is short but brake can still be readily applied (3.1.3c)

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Front Wheel spoke slightly loose. (4.2.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Fairings insecure but not likely to impede the steering (2.1.2e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel spoke slightly loose. (4.2.1b)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain worn but not considered excessive (6.2.1e)