2001 Peugeot Boxer

Nearside Front inner wheel arch corroded through

Offside outer floor corroded through. not chassis.

general underbody corrosion

rear leaf springs corroded.

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis out rigger (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Rear Tyre tread depth below requirements of 1.6mm & deteriorated (5.2.3 (e)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Inner step corroded

Offside outer sill corroded front & rear

Exhaust system not adequately supported (7.1.1)

Horn not working (1.6.2a)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear rear brake application uneven (3.7.B.2)

Offside Front Outer Brake pipe excessively corroded (3.6.B.2c)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front tyre has cut in sidewall but not to cords

Offside Front headlight main beam intermittent opperation

Front Subframe mounting prescribed area is corroded but not considered excessive both (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Front Subframe mounting prescribed area is corroded but not considered excessive both (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

offside rear tyre has a small cut

screen damaged where centre mirror should sit

Battery insecure (1.9.1)

Battery leaking electrolyte (1.9.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

offside rear tyre has a small cut

screen damaged where centre mirror should sit

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside front brake binding (3.7.B.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both inner sills corroded

brake pipes greased

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

corrosion on brake pipes not all pipes visible at test copvered in thick underseal/grease

corrosion round suspension mounts not holed at test

front brake imbalance 30%

osf lower suspension arm back bush slight play/wear

osf wheel arch in enginebay corroded not holed at test

Type approved seatbelt information.off certificate number ke0441497

osf bottom ball joint boot split.

Nearside Front Brake hose lock to lock check twists a brake hose (2.2.D.1b)