MOT Status
ExpiredMileage
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake fluid warning lamp illuminated (3.6.G.2)
Exhaust system not adequately supported clamp corroded away (7.1.1)
Nearside Lower Suspension component mounting prescribed area is excessively corroded inner sill in several places (2.4.A.3)
Nearside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor in several places (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded rear lower inner sill (2.4.A.3)
Nearside Side repeater missing (1.4.A.2b)
Nearside Side repeater not working (1.4.A.2c)
Nearside Suspension component mounting prescribed area is excessively corroded out rigger (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Lower Suspension component mounting prescribed area is excessively corroded inner sill in places (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded rear inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded floor in several places (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded rear out rigger (2.4.A.3)
Offside Suspension component mounting prescribed area is excessively corroded out rigger (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Inner Suspension component mounting prescribed area is excessively corroded valance in several places (2.4.A.3)
Rear Outer Suspension component mounting prescribed area is excessively corroded valance in several places (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Service brake: efficiency below requirements (3.7.B.7)
Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)
Trailer electrical socket deteriorated so that lead cannot be securely connected (1.9.3b)
Brake load sensing valve linkage seized (3.6.E.3) DANGEROUS
Brake load sensing valve linkage seized (3.6.E.3) DANGEROUS
Brake pedal creeps down while the pedal is held under pressure (3.3.B.1a) DANGEROUS
Front Lower Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.B.2)
underside heavily undersealed
Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not fitted (1.1.C.1b)
Brake pipe slightly corroded (3.6.B.2c)
Centre Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside rear brake binding (3.7.B.1)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not fitted (1.1.C.1b)
Oil leak
Steering column universal joint has slight play (2.1.5)
Under-trays fitted obscuring some underside components
both rear tyres on approx 3mm
brake warning lamp on
various areas of surface corrosion to underside of vehicle
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Under-trays fitted obscuring some underside components
advise corrosion to both offside front and offside rear inner wheel arch areas (not seriously effecting the streng) with 30cm of a body mountings
both rear tyres on approx 3mm
brake warning lamp on
slight lift in both front lower ball joints
slight play in steering universal joint
various areas of surface corrosion to underside of vehicle
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front wheel bearing rough when rotated (2.5.A.2)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Power steering component(s) leaking (2.3.3b)
Power steering fluid level below minimum (2.3.1)
Registration plate lamp not working (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Under-trays fitted obscuring some underside components
advise corrosion to both offside front and offside rear inner wheel arch areas (not seriously effecting the streng) with 30cm of a body mountings
both rear tyres on approx 3mm
brake warning lamp on
slight lift in both front lower ball joints
slight play in steering universal joint
various areas of surface corrosion to underside of vehicle
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
number plate light surround damaged
Front Exhaust has a major leak of exhaust gases (7.1.2)
Indicator switch faulty (1.4.A.1)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
number plate light surround damaged
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
front silencer to front pipe slight crack
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake pedal anti-slip provision loose (3.3.A.1b)
Exhaust system not adequately supported (7.1.1)
Nearside Rear Leaf spring to axle securing bolt insecure (2.4.B.7b)
Offside Front Headlamp insecure (1.7.3)
Offside Front Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Rear Leaf spring to axle securing bolt insecure (2.4.B.7b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Axle beam has excessive vertical movement between stub axle and axle beam (2.5.A.1a)
Front bumper insecure
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Oil leak
n/s lower mirror missing
n/s/r lamp damaged
o/s/f indicator cracked
Loading door cannot be secured in the closed position (6.4.1)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working (1.1.5c)
Service brake: efficiency below requirements (3.7.B.7)
Stop lamp not working (1.2.1b)
Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Rear Registration plate lamp not working (1.1.5c)
How Reliable is the Iveco Daily?
Based on 817,098 MOT tests across 76,231 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y781 TKM is a 2001 Iveco Daily in White with a 2,798cc diesel engine. This vehicle has been through 19 MOT tests with a personal pass rate of 52.6%.
Across all 2001 Iveco Daily models, the average MOT pass rate is 62.2% with a typical mileage of 117,890 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily fails its MOT is parking brake: efficiency below requirements, accounting for 54,319 recorded failures. If you're considering buying Y781 TKM, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily typically stays on UK roads for around 30 years. At 25 years old, this Iveco Daily is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y781 TKM?
You can check the full history of Y781 TKM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y781 TKM registered?
Y781 TKM is a 2001 Iveco Daily, first registered on 10 April 2001.
Is Y781 TKM safe to buy?
The MOT history for Y781 TKM shows 19 tests with a 52.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y781 TKM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y781 TKM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.