2001 Mercedes-benz Vito

Brake load sensing valve seized (3.6.E.3)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front coil spring incomplete (2.4.C.1a)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front constant velocity joint is excessively worn (2.5.C.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front coil spring incomplete (2.4.C.1a)

Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

passenger door cannot be opened from outside the vehicle (6.2.B.1c)

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Parking brake lever has little reserve travel (3.1.6b)

o/s/f steering arm has slight play in ball joint

Brake pipe slightly corroded (3.6.B.2c)

both front inner driveshaft boots split

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

both front inner driveshaft boots split

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Fuel pipe leaking (7.2.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Brake pipe slightly corroded (3.6.B.2c)

rear discs corroded

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front registration plate deteriorated (6.3.1d)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp aim too low (1.8)

Rear Registration plate lamp not working (1.1.C.1d)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Registration plate lamp not working (1.1.5c)

Offside Registration plate lamp not working (1.1.5c)

Brake pad(s) wearing thin (3.5.1g)

Offside Inner Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber casing damaged externally so the unit does not function (2.7.2a)

front tyres will need changing at next service