MOT Status
ExpiredMileage
107,623 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))
Brake performance unable to be tested load valve seized (1.2.1 (g))
Emissions unable to be completed engine oil level below minimum (8.2.2.2 (e))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Headlamp insecure (4.1.1 (c))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced door shut area, yellow chalked (6.1.1 (c) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn trailing arm (5.1.2 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired inner sill area (5.3.6 (a) (i))
Nearside Rear Road wheel fixings not compatible wheel spaced out and not sat on spigot (5.2.2 (d))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area has several holes marked with yellow chalk (5.3.6 (a) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Headlamp insecure (4.1.1 (c))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill areas, several holes yellow chalked (7.1.1 (a) (i))
Offside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill area, yellow chalked (7.1.1 (a) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush excessively worn trailing arm (5.1.2 (b) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Road wheel fixings not compatible wheel spaced out and not sat on spigot (5.2.2 (d))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill areas, several holes yellow chalked (5.3.6 (a) (i))
Front Registration plate insecure but not likely to fall off (0.1 (a))
Offside Front drivers door corroded
Rear nearside and offside lamp lenses damaged
clutch worn
every body panel corroded in several places
front edge of bonnet corroded
vehicle is beyond repair
Nearside Front headlamp slightly loose still secure at time of test
Nearside Rear wheel arch, wing and bumper area slightly damaged and corroded
Offside Front headlamp slightly loose still secure at time of test
Offside Rear Position lamp insecure (4.2.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength subframe rear mount area (5.3.6 (a) (i))
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill area (6.1.1 (c) (i))
Nearside Rear Position lamp likely to become detached (4.2.1 (c) (ii))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front headlamp slightly loose still secure at time of test
Nearside Rear wheel arch, wing and bumper area slightly damaged and corroded
Offside Front headlamp slightly loose still secure at time of test
Offside Rear Position lamp insecure (4.2.1 (c) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Emissions unable to be completed exhaust leak (8.2.1.2 (d))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Headlamp insecure (4.1.1 (c))
Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength multiple areas (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Rear Tyre fouling a part of the vehicle fouling the inner arch (5.2.3 (f))
advise near side front suspension turret corroded
Surface corrosion forming on underside and some suspension components.
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Road wheel slightly distorted (5.2.2 (c) (i))
auxiliary belt perished
brake discs corroded
corrosion outside specified areas
corrosion to bulk head area
corrosion to underside,floors,sills
spare tyre defective and perished
washer jet weak
Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp reflector seriously defective (4.1.1 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Road wheel slightly distorted (5.2.2 (c) (i))
auxiliary belt perished
brake discs corroded
corrosion outside specified areas
corrosion to bulk head area
corrosion to underside,floors,sills
load sensing valve damp
spare tyre defective and perished
washer jet weak
Headlamp has a product on the lens but not seriously reducing light output both front (1.7.5a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
both front anti-roll bar bushes at lower arms starting to perish
n/s front inner drive shaft boot starting to perish
plates welded to o/s outer sill
slight corrosion at rear floor near hand brake cables
slight under body corrosion
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Side repeater not working (1.4.A.2c)
Nearside rear brake application uneven (3.7.B.2)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear fog lamp not working (1.3.2b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
both front anti-roll bar bushes at lower arms starting to perish
n/s front inner drive shaft boot starting to perish
n/s head lamp reflector in poor condition
plates welded to o/s outer sill
rear exhaust mounting broken
slight corrosion at rear floor near hand brake cables
slight under body corrosion
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
rear exhaust mounting rubber missing
wiper switch damaged
Brake pedal anti-slip provision missing (3.3.A.1b)
Centre Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
rear exhaust mounting rubber missing
wiper switch damaged
n/s rear tyre just under 3mm and starting to get low on inner edges
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
n/s rear tyre just under 3mm and starting to get low on inner edges
nail in n/s front tyre
Offside Front Shock absorber has a light misting of oil (2.7.3)
both front anti roll bar bushes starting to perish at suspension arms
n/s rear tyre starting to perish on outer side wall
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Side repeater not working (1.4.A.2c)
Nearside Stop lamp not working (1.2.1b)
Offside Rear fog lamp not working (1.3.2b)
Offside front brake application uneven (3.7.B.2)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Offside Front Shock absorber has a light misting of oil (2.7.3)
both front anti roll bar buses at lower suspension arms starting to perish
n/s rear tyre starting to perish on outer side wall
both front shock absorbers slight fluid leak
both headlamp patterns poor
front brake discs slightly distorted
n/s/f tyre getting low
early signs of leakage at offside and nearside front shock absorbers.
offside front brake disc, inner face on limits of wear/corrosion.
Offside Stop lamp not working (1.2.1b)
early signs of leakage at offside and nearside front shock absorbers.
offside front brake disc, inner face on limits of wear/corrosion.
early signs of leakage at nearside front shock absorber.
Brake load sensing valve linkage seized (3.6.E.3)
nearside front tread getting low.
offside and nearside front shock absorbers showing early signs of leakage.
Parking brake lever has no reserve travel (3.1.6b)
nearside front tread getting low.
offside and nearside front shock absorbers showing early signs of leakage.
How Reliable is the Citroen C15?
Based on 153,086 MOT tests across 16,950 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y802 SRV is a 2001 Citroen C15 in Green with a 1,868cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 2001 Citroen C15 models, the average MOT pass rate is 64.4% with a typical mileage of 74,438 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Citroen C15 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 8,845 recorded failures. If you're considering buying Y802 SRV, it's worth having these areas checked by a mechanic before committing.
The Citroen C15 typically stays on UK roads for around 37 years. At 25 years old, this Citroen C15 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of Y802 SRV?
You can check the full history of Y802 SRV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y802 SRV registered?
Y802 SRV is a 2001 Citroen C15, first registered on 8 March 2001.
Is Y802 SRV safe to buy?
The MOT history for Y802 SRV shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y802 SRV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y802 SRV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.