MOT Status
ExpiredMileage
154,058 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake disc worn, pitted or scored, but not seriously weakened All (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both tyres inner edges (5.2.3 (e))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
under-covers present.
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement d bush (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides, most front (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive Attention recommended (8.4.1 (a) (i))
Under tray covers fitted
Nearside Front Lower Suspension arm ball joint excessively worn most rear (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both sides, most front (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
High travel on parking brake lever
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive Attention recommended (8.4.1 (a) (i))
Under tray covers fitted
Front Brake pad(s) wearing thin RECOMMEND REPLACEMENT (1.1.13 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement n/s & o/s - front facing arms (5.3.4 (a) (i))
Headlamp has a product on the lens but not seriously reducing light output n /s & o/s (4.1.4 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
n/s/f & o/s/f brake pipes corroded
undertrays and sill covers fitted
Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre worn close to legal limit/worn on edge both rear wearing inner edge (5.2.3 (e))
n/s hand brake performance low
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Brake hose excessively deteriorated metal section (1.1.12 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Brake hose excessively deteriorated metal section (1.1.12 (b) (ii))
Brake pipe corroded, covered in grease or other material both front (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Tyre worn close to legal limit/worn on edge both rear wearing inner edge (5.2.3 (e))
n/s hand brake performance low
Headlamp aim not tested unable to test aim on both headlamps as there is no beam image/patter showing (4.1.2 (b))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Upper Suspension arm ball joint excessively worn back arm (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Upper Suspension arm ball joint excessively worn back arm (5.3.4 (a) (i))
Parking brake lever ratchet mechanism worn to the extent that the brake may inadvertently release half the teeth missing (1.1.6 (b) (ii))
both front brake discs worn
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
both rear tyres getting low on tread on inner edges
Front Both metal brake heavily corroded
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement split, (front most) (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement split, (front most) (5.3.4 (a) (i))
Offside Number plate light cover missing
Oil leak, but not excessive Dripping on exhaust,( attention required ASAP. ) (8.4.1 (a) (i))
Under trays fitted
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Driver's door cannot be opened from inside the vehicle (6.2.3 (a))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Front Headlamp aim so that beam "kick up" is not visible on the screen Both (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a))
Brake fluid warning lamp illuminated (1.1.10 (f))
Front Both metal brake heavily corroded
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement split, (front most) (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement split, (front most) (5.3.4 (a) (i))
Offside Number plate light cover missing
Oil leak, but not excessive Dripping on exhaust,( attention required ASAP. ) (8.4.1 (a) (i))
Under trays fitted
Front Both metal brake pipes slightly corroded
Front Both tyres heavily perishing/wearing inner edge
Oil leak
Rear Both tyres perishing/wearing inner edge
Rear Metal brake pipes slightly corroded
Under body covers fitted
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Registration plate lamp not fitted (1.1.C.1b)
Front Both metal brake pipes slightly corroded
Front Both tyres heavily perishing/wearing inner edge
Oil leak
Rear Both tyres perishing/wearing inner edge
Rear Metal brake pipes slightly corroded
Under body covers fitted
Covers fitted
Nearside Front Metal brake pipe heavily corroded
Oil leak
Rear Both tyres heavily balding inner edge
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside rear parking (secondary) brakes imbalanced (3.7.B.6b)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Covers fitted
Nearside Front Metal brake pipe heavily corroded
Oil leak
Rear Both tyres heavily balding inner edge
Rear Brake pads wearing low
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
all covers fitted
offside and nearside front metal brake pipes rusty
wear in steering rack
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Registration plate lamp not working (1.1.C.1d)
all covers fitted
wear in steering rack
offside and nearside front metal brake pipes rusty
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Under-trays fitted obscuring some underside components
both outer sills and under wheel arches covered
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Engine covers fitted obscuring some components in the engine bay
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Under-trays fitted obscuring some underside components
both outer sills and under wheel arches covered
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Headlamp aim too low (1.8)
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Coolant leak
Offside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Registration plate lamp not working (1.1.C.1d)
nearside rear tyre warn badly inner edge
Coolant leak
Offside Rear Seat belt damaged but not affecting the operation of the belt (5.2.2a)
nearside rear tyre warn badly inner edge
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.C.1b)
Nearside Rear Direction indicators slightly discoloured (1.4.A.2f)
Offside Rear Direction indicators slightly discoloured (1.4.A.2f)
brake warning light illuminated.
rear pads look low.
tested wet.
undertrays fitted.
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)
condensation in n/s headlamp
front and rear pads very low and will be required soon
handbrake just up to mot requirements
number plate spacing just within limits
steering rack damp on off side
How Reliable is the BMW X5?
Based on 1,735,343 MOT tests across 137,484 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y813 KTF is a 2001 BMW X5 in Black with a 2,979cc petrol engine. This vehicle has been through 33 MOT tests with a personal pass rate of 57.6%.
Across all 2001 BMW X5 models, the average MOT pass rate is 68.7% with a typical mileage of 98,867 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW X5 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 31,544 recorded failures. If you're considering buying Y813 KTF, it's worth having these areas checked by a mechanic before committing.
The BMW X5 typically stays on UK roads for around 25 years. At 25 years old, this BMW X5 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y813 KTF?
You can check the full history of Y813 KTF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y813 KTF registered?
Y813 KTF is a 2001 BMW X5, first registered on 24 May 2001.
Is Y813 KTF safe to buy?
The MOT history for Y813 KTF shows 33 tests with a 57.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y813 KTF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y813 KTF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.