2001 Piaggio Vespa

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) has slight run out (3.2.A1m)

Headlamp aim too high (1.6)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) has slight run out (3.2.A1m)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Fuel cap sealing washer missing (7.2.2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) slightly worn (3.2.A1l)

Front wheel bearings have slight free play (2.3.5b)

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

slight deterioration fuel pipe

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front wheel bearings have slight free play (2.3.5b)

Offside Front Direction indicator damaged but function not impaired (1.5.3a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Wheel alignment slightly misaligned. (2.5.1)

slight deterioration fuel pipe

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Headlamp aim not tested (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))