MOT Status
ExpiredMileage
170,534 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe slightly corroded both front to rear (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside rear cross member / underbody sill rusted through outside prescribed area
Nearside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded cup (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Brake pipe slightly corroded both front to rear (3.6.B.2c)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
nearside rear cross member / underbody sill rusted through outside prescribed area
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
REAR CROSS MEMBER AND REAR OUTER WHEEL ARCHES RUSTED THROUGH, NOT IN PRESCRIBED AREA
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Brake pipe excessively corroded FRONT TO REAR (REAR SECTION (3.6.B.2c)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded OUTER SILL (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded UNDERBODY SILL (2.4.A.3)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Brake pipe excessively corroded FRONT TO REAR (REAR SECTION (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
REAR CROSS MEMBER AND REAR OUTER WHEEL ARCHES RUSTED THROUGH, NOT IN PRESCRIBED AREA
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Headlamp aim too high (1.8)
Brake load sensing valve seized (3.6.E.3)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Front Lower Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Body has slight corrosion (6.1.B.2)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Body has slight corrosion (6.1.B.2)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
near side rear disc pitted off side rear disc pitted
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)
Nearside Front Lower Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Front Brake hose seriously damaged (found during steering lock to lock check) (2.2.D.2b)
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
near side rear disc pitted off side rear disc pitted
Nearside Outer Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Front Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.6.6)
Offside Inner Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Side repeater incorrect colour (1.4.A.2f)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Outer Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Brake pipe excessively corroded (3.6.B.2c)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y835 HPH is a 2001 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 60%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y835 HPH, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y835 HPH?
You can check the full history of Y835 HPH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y835 HPH registered?
Y835 HPH is a 2001 Mercedes-benz Vito, first registered on 1 July 2001.
Is Y835 HPH safe to buy?
The MOT history for Y835 HPH shows 20 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y835 HPH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y835 HPH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.