2001 Aprilia RX50

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Lower Front suspension assembly slightly corroded. (2.3.1)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Front Direction indicator incorrect colour (1.5.1b)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Exhaust mounting missing bolt missing (7.1.1c)

Drive chain worn but not considered excessive (6.2.1e)

Front Drive chain sprocket slightly worn (6.2.1e)

Nearside Lower Front suspension assembly slightly corroded. (2.3.1)

Chain guard missing

Front Brake disc(s) slightly scored (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Drive chain excessively tight (6.2.1d)

Front Brake locking device missing (3.2.A1e)

Headlamp damaged but function not impaired (1.2.3a)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Rear reflector on motorcycle missing (1.4.1)

Headlamp damaged but function not impaired (1.2.3a)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly loose. (4.2.1b)

Drive chain worn to excess (6.2.1e)

Nearside Front Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Steering movement slightly stiff (2.2.1b)

main stand pivots worn

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Drive chain excessively loose (6.2.1d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread not clearly visible (4.1.3(i))

Fuel cap sealing washer missing (7.2.2c)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Rear Direction indicator not working (1.5.1c)

Rear mono-shock pivot seized (2.4.B.4)

Rear reflector on motorcycle missing (1.4.1)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear wheel bearings have excessive free play (2.4.A.2c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Steering movement slightly stiff (2.2.1b)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Rear Wheel spoke cracked. (4.2.1b)

Rear Wheel spoke missing (4.2.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Brake disc(s) has slight run out (3.2.A1m)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(i))

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp insecure (1.2.3b)

Horn not loud enough to be heard by another road user (1.7.3a)

Nearside Front Direction indicator missing (1.5.1a)

Nearside Rear Direction indicator flashing less than 60 times a minute (1.5.1c)

Offside Front Direction indicator missing (1.5.1a)

Offside Rear Direction indicator flashing less than 60 times a minute (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Registration plate insecure (6.3.1b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)