2001 Mitsubishi Lancer

Chassis under sealed

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Obligatory mirror missing (3.3 (a))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Chassis under sealed

Front Vehicle structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Upper suspension arm bolt of wrong type

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all 4 hub units & fixings corroded

complete underside covered in fresh underseal not allowing full inspection of all components & prescribed areas

Emissions not tested (8.2.1.2 (d))

Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Upper suspension arm bolt of wrong type

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

all 4 hub units & fixings corroded

complete underside covered in fresh underseal not allowing full inspection of all components & prescribed areas

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside chassis renforcments (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above toe arm mounting (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inside chassis renforcments (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill join wheel arch area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above toe arm mounting (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced Various areas (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced chassis rail (2.4.G.1)

Offside Front Brake back plate(s) securing device missing (3.5.1j)

Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced chassis rail (2.4.G.1)

Offside Rear Upper Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced chassis holed (2.4.G.1)

Front Tyre worn close to the legal limit wearing on inner edges (4.1.E.1)

Front Vehicle structure has slight corrosion crossmember (6.1.B.2)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Oil leak engine oil cooler damp ()

Vehicle structure has slight corrosion floor pan corroded (6.1.B.2)

Front Fuel Pipe/s corroded to rear ()

Front Vehicle structure has slight corrosion crossmember (6.1.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Vehicle structure has slight corrosion chassis rail (6.1.B.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Vehicle structure has slight corrosion chassis rail (6.1.B.2)

vehicle floorpan corroded

Exhaust catalytic converter missing where one was fitted as standard (7.1.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floorpan (6.1.B.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Front Fuel Pipe/s corroded to rear ()

Front Vehicle structure has slight corrosion crossmember (6.1.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Vehicle structure has slight corrosion chassis rail (6.1.B.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Vehicle structure has slight corrosion chassis rail (6.1.B.2)

vehicle floorpan corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Fuel tank leaking (7.2.3) DANGEROUS

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

surface corrosion to 90% of underside of car

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Fuel pipe/s corroded

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1a)

both outer sills rusty

underside of vehicle very rusty

Fuel pipe slightly damaged (7.2.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

coolant reservior empty

nearside and offside front tyres worn heavily on inner edges - bald in raised tread areas

nearside front floorpan corroded outside prescribed areas

vehicle presenter has provided satisfactory documentation showing a pre 08/1992 replacement engine has been fitted

Fuel tank leaking (7.2.3)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear fog lamp tell tale not working (1.3.1b)

Fuel pipe slightly damaged (7.2.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

coolant reservior empty

nearside and offside front tyres worn heavily on inner edges - bald in raised tread areas

nearside front floorpan corroded outside prescribed areas

vehicle presenter has provided satisfactory documentation showing a pre 08/1992 replacement engine has been fitted

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Brake pad(s) wearing thin (3.5.1g)

side sill covers fitted

Nearside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

surface corrosion evident to n/s outer sill, both front chassis legs, rear crossmember to chassis areas