2001 Kia Shuma

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Body has a sharp edge caused by damage (6.1.C.1)

Offside Front Lower Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

front brake application uneven (3.7.B.2)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Slight brake bind to offside front.

Engine management light on

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Engine management light on

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear registration plate obscured (6.3.1d)

Both front shock absorber casings rusted.

Both headlight lenses slightly clouded.

Minor damage to outer sidewall of nearside rear tyre.

Rear number plate slightly obscured by reverse sensor.

Surface corrosion to rear brake pipes.

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside rear and nearside rear tyres worn to 2.5-3mm.

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Headlamp aim too high (1.8)

Offside rear and nearside rear tyres worn to 2.5-3mm.

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear metal brake pipes surface rusting

rear tyres 2-3mm

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

rear metal brake pipes surface rusting

rear tyres 2-3mm

front wiper blades slight split

rear trailing arm bushes starting to separate

rear tyres 2-2.5mm

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

handbrake and rear footbrake effort low,advise investigate and attend

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)