2001 Ford Galaxy

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis section (5.3.6 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust deteriorated with slight blow

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis section (5.3.6 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

exhaust deteriorated with slight blow

Play in steering rack inner joint(s) ()

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Play in steering rack inner joint(s) ()

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Steering rack gaiter split (2.2.D.2d)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

both exhaust mounting brackets corroded off front exhaust

nearside rear tyre wearing low on edges of tread

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is severely distorted (2.4.A.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

both exhaust mounting brackets corroded off front exhaust

nearside rear tyre wearing low on edges of tread

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

exhaust mounting brackets corroded off exhaust front pipe

nearside front tyre starting to wear low on outer edge of tread

Offside Front Braking system leaking (3.6.A.1)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Centre Exhaust system not adequately supported (7.1.1)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

nearside rear tyre badly scuffed on outer side wall

offside rear tyre starting to wear low on inner edge of tread

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Headlamp aim too high (1.8)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both front tyres starting to wear low on edges of tread

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)