MOT Status
ExpiredMileage
145,493 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Headlamp has a product on the light source but not seriously reducing light output (4.1.4 (b))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Chip in offside front headlight lense
General corrosion to underside of vehicle
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Chip in offside front headlight lense
General corrosion to underside of vehicle
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust tail pipe missing
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pad warning light on
Exhaust tail pipe missing
Nearside Rear Nail in tyre And slightly out of shape ()
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Outer Brake pad(s) wearing thin (3.5.1g)
Parking brake lever has little reserve travel (3.1.6b)
Crack and chip in windscreen
Exhaust tail pipe missing
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s) ()
Nearside Front Inner Suspension component mounting prescribed area is excessively corroded strunt top mount, under bonnet (2.4.A.3)
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension component mounting prescribed area is excessively corroded inner wing/chassis leg (2.4.A.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Crack and chip in windscreen
Exhaust tail pipe missing
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s) ()
Chip in windscreen
Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Chip in windscreen
Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Front chassis slightly corroded
Front wipers not self parking
Nearside front strut top bearing starting to get tight/seize
Slight rust/corrosion to body
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Parking brake: efficiency below requirements (3.7.B.7)
front brake application uneven (3.7.B.2)
Front chassis slightly corroded
Front wipers not self parking
Nearside front strut top bearing starting to get tight/seize
Nearside front tyre getting close to warning bars
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Slight rust/corrosion to body
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Slight play in offside front steering
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Slight play in offside front steering
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Both front wiper blades split
Nearside front inner cv boot split
Nearside front tyre persished
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Child seat fitted not allowing full inspection of adult belt
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Child seat fitted not allowing full inspection of adult belt
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Windscreen wiper blade deteriorated (8.2.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Windscreen wiper blade deteriorated (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y895 UMW is a 2001 Mercedes-benz Vito in Blue with a 2,151cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 60%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y895 UMW, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y895 UMW?
You can check the full history of Y895 UMW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y895 UMW registered?
Y895 UMW is a 2001 Mercedes-benz Vito, first registered on 18 May 2001.
Is Y895 UMW safe to buy?
The MOT history for Y895 UMW shows 30 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y895 UMW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y895 UMW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.