MOT Status
ValidMileage
145,657 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
secondary bonnet catch
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
secondary bonnet catch
Anti-lock braking system warning lamp does not illuminate (1.6 (a))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-lock braking system component missing Ring (1.6 (e))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Side repeater incorrect colour (4.4.3 (a))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Fuel tank exhaust shield missing where fitted as original equipment creating a risk of fire (6.1.3 (e)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
General underbody corrosion
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened Inner face (1.1.14 (a) (ii))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Tyre worn close to legal limit/worn on edge approx 2-3mm and worn inside edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Secondary bonnet catch defective
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Brake pipe excessively corroded all (1.1.11 (c))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill near seat base mounting (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill near seat base mounting (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Side repeater incorrect colour (4.4.3 (a))
Parking brake lever inoperative (1.1.6 (d))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Central Exhaust shield missing where fitted as original equipment creating a risk of fire near fuel tank (6.1.3 (e)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Exhaust mounting defective (6.1.2 (a))
exhaust badly corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing (5.3.6 (a) (i))
Nearside Rear Brake pipe excessively corroded main through (1.1.11 (c))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Towbar excessively corroded within 30cm of towbar mounting x member (6.1.6 (i) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wing (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Brake pipe excessively corroded main through (1.1.11 (c))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Towbar excessively corroded within 30cm of towbar mounting x member (6.1.6 (i) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
heavy rust & repairs to underbody
very heavy rust both under sill and chassis x members
all under vehicle has surface corrosion
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive panel (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive panel (2.4.A.3)
Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt n/s and o/s (2.4.G.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Nearside Rear Stop lamp not working (1.2.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner and outer sills (2.4.A.3)
Offside Front inner wheel arch under head lamp corroded/ holed
Rear valance all across n/s/r to o/s/r corroded and holed
Nearside Seat belt anchorage prescribed area is excessively corroded UNDER SILL (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded UNDER SILL (5.2.6)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Upper Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Upper Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Side repeater slightly discoloured (1.4.A.2f)
under body rusty
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Front Lower Front suspension retaining device ineffective (2.5.A.4) DANGEROUS
Nearside Front suspension has a suspension lower ball joint securing nut loose (2.5.B.1a) DANGEROUS
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Upper Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Upper Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Side repeater slightly discoloured (1.4.A.2f)
under body rusty
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Stop lamp not working (1.2.1b)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Side repeater slightly discoloured (1.4.A.2f)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
both rear shock top cases slighty corroded
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust system not adequately supported (7.1.1)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Headlamp aim too low and too far to the left. (1.8)
Offside Headlamp aim too low and too far to the left. (1.8)
Centre exhaust heat sheild loose
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Most outer body mounts slightly corroded (surface rust)
Nearside front inner c.v. boot split
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear chassis members slightly corroded (surface rust)
Brakes imbalanced across an axle (3.7.B.5b)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Centre exhaust heat sheild loose
Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Most outer body mounts slightly corroded (surface rust)
Nearside front inner c.v. boot split
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear chassis members slightly corroded (surface rust)
Both inner sils slightly corroded at rear
Both rear tyres wearing on inner edges
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front discs getting thin
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Rear Stop lamp not working (1.2.1b)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Rear Stop lamp not working (1.2.1b)
Rear Exhaust system not adequately supported (7.1.1)
Exhaust has a minor leak of exhaust gases (7.1.2)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
Y916 LAB is a 2001 Mercedes-benz Vito in Silver with a 2,151cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 55.6%.
Across all 2001 Mercedes-benz Vito models, the average MOT pass rate is 63.7% with a typical mileage of 112,214 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying Y916 LAB, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 25 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of Y916 LAB?
You can check the full history of Y916 LAB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was Y916 LAB registered?
Y916 LAB is a 2001 Mercedes-benz Vito, first registered on 9 May 2001.
Is Y916 LAB safe to buy?
The MOT history for Y916 LAB shows 27 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does Y916 LAB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on Y916 LAB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.